Nortel 1140E - While on an Active Call; Making a New Call

While on an active call
141
While on an active call
You can use the following features during an active call:
• “Making a new call” on page 141
• “Placing a call On Hold” on page 143
• “Using 3-way calling” on page 146
• “Transferring a call” on page 148
• “Using Park Call” on page 151
You use the Action Context-sensitive soft key to perform the following
actions with an active call:
1. New Call - use this action to begin a new call while other calls are on
hold.
2. Release Call - use this action to release (hang-up) the selected call.
3. Transfer Call - use this action to transfer the call to another phone
number or SIP address.
4. Park Call - use this action to park a call on the call server or to a
specific user. The call can be accessed from any phone and it keeps
your phone line clear. (Not available for all call servers.)
Making a new call
You can initiate a new call during a current call. If you do not place the
current call on hold first, the IP Phone 1140E automatically places the
current call on hold when you initiate a new call. You can initiate a new
call using any of the following methods:
• “Initiating a call using the Action Context-sensitive soft key” on
page 142
• “Initiating a call from the Address Book” on page 102
• “Initiating a call from the Call Inbox” on page 122
• “Initiating a call from the Call Outbox” on page 128