Nortel 1140E - Creating a Call Forward Feature Key

Additional features
166
To designate a Send IM Key using the Copy key:
Creating a Call Forward feature key
To have your incoming calls forwarded, designate a Feature key with a
telephone number or SIP address. Then, you press the designated
feature key to forward the calls to the appropriate telephone number or
SIP address.
Note: You can also set up Call Forwarding using the Servcs Context-
sensitive soft key, but this does not set a feature key as a short cut for
call forwarding. (See “Using Call Forward” on page 175.)
There are two methods of assigning a feature key to use to activate the
Call Forward feature:
• Assigning a feature key from the Preferences menu
• Assigning a feature key using the Copy fixed key.
To configure a Feature Key to use as a Call Forward short cut, press the
Prefs Context-sensitive soft key, select Feature Options, and select
Feature Keys from the menu.
1. Press the Up/Down navigation key to
highlight Send IM Key from the menu.
Select
Cancel
2. Press the Select Context-sensitive soft
key.
or
Press the Cancel Context-sensitive soft
key to return to the previous step.
3. Follow the procedure “To create a Send
IM feature key:” on page 164.