Nortel 1140E - Setting the Domain

Accessing the IP Phone 1140E
45
“Your User Profile” on page 52
“Overwriting your personal Address Book” on page 54
Note: The system automatically logs you back in after a power
outage or firmware upgrade. This feature is a network wide
configuration that the system administrator sets up.
Setting the domain
During the login process, if you need to change the domain or confirm the
domain you log into is correct, press the Domain Context-sensitive soft
key from the login screen. The current domain appears on the
IP Phone 1140E LCD screen. You can edit the domain that is listed or
press the Domains Context-sensitive soft key to access a list of available
domains to which you can choose to connect.
Note: You should check with your system administrator before editing
or changing domains.
To change the domain:
Edit
1. Choose one of the following:
— Press the Domains Context-
sensitive soft key to change the
current domain.
— Press the Done Context-sensitive
soft key to keep existing
configurations and return to the User
Login screen.
Note: You can edit the domain to which
the IP Phone 1140E connects. Contact
your system administrator before editing
the domain.
or
Domains Done