Accessing the IP Phone 1140E
52
• Press the Release/Goodbye key to dismiss the logout prompt and
switch to permanent login.
Note: If you press the Release/Goodbye key to dismiss the logout
using this method, you also terminate the call.
If you do not respond, the prompt times out in 45 seconds and the phone
switches to permanent login.
Selecting a location
When you first login to the IP Phone 1140E, the system prompts you for a
location. The location you select is saved in your User Profile.
Depending on your service provider, the Enhanced Emergency Service
uses the location you select or the Directory Number (DN) on the call
server, when handling emergency calls. The call server’s configuration
determines how emergency service calls are handled by your IP Phone.
Note 1: During an emergency call you cannot log out from the phone
or release or disconnect the call. The IP Phone remains connected to
the emergency service until disconnected by the emergency service
operator.
Note 2: If the login time expires during an emergency call, no prompt
appears and the phone automatically switches to permanent login.
Your U ser P rofi le
Your User Profile contains your specific settings and data. You are
prompted to create a User Profile the first time you log in to your
IP Phone 1140E. If you delete your User Profile the phone reboots and
ATTENTION *
When you set your user profile, for the first
time, you must confirm that the selected
location is correct. You can view your
location by accessing the phone information
screen. (See page 188.)
To Next Page
Loading...
