Configuring the IP Phone 1140E
56
Configuring the IP Phone 1140E
You may want to adjust a few settings of the IP Phone 1140E to conform
to the environment where you use the phone. These settings are saved to
your User Profile. This section describes some of the setting that you can
customize on your IP Phone 1140E.
• “Adjusting the display screen contrast” on page 56
• “Creating the idle screen text display” on page 57
• “Selecting a ring pattern” on page 58
• “Adjusting the ring volume” on page 61
• “Adjusting the volume of the Handset, Headset, and Handsfree
mode” on page 62
• “Selecting a language” on page 64
• “Selecting a date format” on page 65
• “Selecting a time zone” on page 66
• “Selecting a time format” on page 67
• “Your IP Phone 1140E is equipped with a wireless audio gateway
system to support Bluetooth wireless technology enabled headsets.
Double press the Headset key to open the Bluetooth Setup dialog box
or press the Prefs Context-sensitive soft key, select Audio, and select
Bluetooth Setup from the menu.” on page 68
Adjusting the display screen contrast
To adjust the LCD screen contrast, press the Prefs Context-sensitive soft
key, select Display, and select Contrast.
To adjust the display screen contrast:
1. Press the Left/Right navigation key to
increase or decrease the display
contrast level.
To Next Page
Loading...
