Nortel 1140E - Setting-Up the Backlight Screensaver; Selecting a Ring Pattern

Configuring the IP Phone 1140E
58
Setting-up the Backlight Screensaver
To set the amount of time the LCD screen remains backlit, press the
Prefs Context-sensitive soft key, select Display, and select Backlight
Screensaver from the menu.
To set-up the Backlight Screensaver:
Selecting a ring pattern
To select the ring pattern for an incoming call, press the Prefs Context-
sensitive soft key select Audio, select Tones, and select Ring Pattern
from the menu.
To select a ring pattern:
1. Press the Up/Down navigation key to
scroll through and highlight the length of
time you want the idle screen to remain
backlit.
2. Choose one of the following:
— Press the Select Context-sensitive
soft key to set the length of time for
the phone to remain backlit and
return to the Display menu.
— Press the Back Context-sensitive
soft key to keep existing
configurations and return to the
Display menu.
1. Press the Up/Down navigation key to
scroll through and highlight the different
ring patterns displayed on the LCD
screen.
or
Select Back