Nortel 1140E - Making a Call Using On-Hook Dialing

Making a call
81
Making a call using on-hook dialing
You can make a call by using on-hook dialing. You enter the SIP address
or phone number before going off-hook.
Note: When using this method you cannot toggle between alphabetic
or numeric input, so this method may not work.
Use these steps to make a call by dialing before initiating the call:
On-hook dialing:
1. Dial the number or SIP address.
Chad
2. Continue the call by:
— Pressing the line feature key
— Lifting the handset
— Pressing the Headset fixed key
— Pressing the Handsfree fixed key
3. To terminate the call, choose one of the
following:
— Replace the handset into the cradle.
— Press the Goodbye key.