While on an active call
151
Using the Park Call feature
You can use the Park Call feature to temporarily park a call to the call
server or to a specific user. You or another user can retrieve the parked
call from another phone. Using Park Call does not tie up a line since it is
held on the call server.
Note 1: The Park Call feature is not available for all call servers.
Contact your system administrator or service provider to determine if
this feature is available to you.
Note 2: When you park a call to the server, the server returns a
retrieval code. You must enter the code to retrieve the call from park.
Using Park Call
During an active call, press the Action Context-sensitive soft key and
select Park Call from the menu. The IP Phone 1140E prompts you with,
“Press Park for server or User to park to a user”.
To park a call to the server
To park a call to a specific user
Press the Park Context-sensitive soft key to
park the call to the server. The server returns
a retrieval code that you must enter to
retrieve the parked call.
1. Press the User Context-sensitive soft
key to park the call to a User.
abc
2. Press the abc/123 Context-sensitive soft
key to toggle between alphabetic and
numeric characters.
Park
User
To Next Page
Loading...
