NuWave Brio - Utilizing Advanced Cooking Modes

19
Owner's Manual
OPERATING INSTRUCTIONS (Continued)
2. When "COOK TIME" is pressed, the LED display will continue
to show the cooking time with countdown. To see the set cooking
temperature, simply press "COOK TEMP".
Note: When the timer reaches 1 minute in the countdown, the LED
display will begin showing the remaining time in seconds (“:59”,
“:58”, etc).
Delay Function
The Delay Function is used to delay the cooking start time of the
Brio. The default delay time is 1 hour (01:00).
1. Press "ON/OFF".
2. Press "DELAY". The LED display will show “01:00”,
“time”, and “dly”.
• To adjust the delay time, press "+" or "-" until the desired delay
time is reached.
• The time will increase and decrease in 1-minute increments.
• To quickly adjust the time in larger increments, hold down "+"
or "-".
• The maximum time is 99 hours, 59 minutes (99:59).
3. Press "START/PAUSE" to begin delay time countdown.
• The set delay time will be displayed with countdown.
• The LED display will show “time”, “dly”, and “:” will ash,
indicating the Brio has started the delay countdown.
4. Once the delay countdown is complete, the Brio will begin
cooking at set cooking temperature and time (default is 360°F for
15 minutes).
Using DELAY with cooking function:
Example #1 Delay cooking 40 minutes, cook at 360°F
for 20 minutes:
1. Press "ON/OFF".
2. Press "COOK TIME", adjust to 20 (00:20) minutes.
3. Press "DELAY", adjust time to 40 (00:40) minutes.
4. Press "START/PAUSE".
Example #2 Delay cooking 60 minutes, cook at 400°F
for 10 minutes:
1. Press “COOK TIME”. Adjust time to 10 minutes (00:10) by
pressing “+” or “-“.
2. Press “COOK TEMP”. Adjust cooking temperature to 400F by
pressing “+” or “-“.
3. Press “DELAY”.
4. Press “START/PAUSE”.
DELAY