NuWave Brio - Page 20

20
Owner's Manual
OPERATING INSTRUCTIONS (Continued)
Preheat Function
The Preheat function ensures that the Brio reaches the desired
temperature before cooking begins. The Preheat function is
perfect for food that require a crisper nish, such as, frozen
appetizers, French fries, or chicken wings. The Brio will preheat
to the temperature that is set for the function that follows the
preheat function.
1. Press [ON/OFF]. The LED display will show “360F” and “temp”.
2. Press [COOK TEMP] then use the [+] or [-] buttons to adjust the
temperature up or down. The LED display will show “temp” and
the set cooking temperature.
3. Press [COOK TIME] then use the [+] or [-] buttons to adjust the
time. The LED display will show “time” and the set cooking time.
4. Press [PREHEAT]. The LED display will show the set cooking
temperature, “temp” & “preh”.
5. Press [START/PAUSE]. The Brio will begin to preheat to the set
cooking temperature. The LED display will show the set cooking
temperature and will ash during preheating.
6. Once the preheat temperature is reached, the Brio will start a
5-minute countdown.
• The LED display will show “ready” and “5” will ash in the LED
display to indicate there are 5-minutes to place food in the Fry
Pan Basket.
• The Brio will maintain the preheat temperature during the
5-minute countdown. If the 5-minute countdown ends, the Brio
will turn off.
7. Open the Fry Pan Basket and place the food into the Basket. The
LED display will show “open”, indicating that the Fry Pan Basket
and Base Tray have been removed from the Brio.
8. Return the Fry Pan Basket and Base Tray to the Brio. This will
automatically start the Brio and begin the cooking process at the
set temperature and time.
Note:
• If the Fry Pan Basket and Base Tray are removed during
preheating, the Brio will automatically pause and start the
5-minute countdown.
• Replace the Fry Pan Basket and Base Tray to resume preheating.
Sear
Default - 400°F, 5 minutes.
PRE-
HEAT
SEAR