NuWave Brio - Page 22

22
Owner's Manual
OPERATING INSTRUCTIONS (Continued)
Sear 2: Default - 400°F, 5 minutes.
1. Press "ON/OFF".
2. Press "SEAR" three times. “sear”, “temp”, and “400F” will be
displayed and “2” will ash.
3. Press "START/PAUSE".
• The Brio will cook at 360°F for 15 minutes (default), then sear
at 400°F for 5 minutes (sear 2).
• When the Brio is nished cooking, it will display “End”.
To adjust the regular cooking temperature and time:
1. Press "ON/OFF".
2. Press "+" or "-" and adjust to the desired temperature.
3. Press "COOK TIME" and "+" or "-" and adjust to the desired time.
4. Press "SEAR" three times.
5. Press "START/PAUSE". The Brio will:
• Cook at selected temperature and time.
• Sear at 400°F for 5 minutes.
• Finish cooking and display “End”.
Stage Function
A maximum of 5 stages can be programmed into the Brio.
1. Press "ON/OFF".
• The Brio LED display will show the default cooking
temperature ("360F") and “temp”. This is stage 1 cooking.
• Adjust cooking temperature by pressing "+" or "-" to reach the
desired temperature.
• Adjust cooking time by pressing "COOK TIME" and "+" or "-"
to reach the desired cooking time.
2. Press "STAGE". The LED display will show default cooking
temperature ("360F"), “temp”, and “stage 2”.
• To adjust the cooking temperature for stage 2, press "+" or "-"
to reach the desired temperature.
• Adjust cooking time by pressing "COOK TIME". The LED
display will show “time”, “stage 2", and “00:00”. Press "+" or "-" to
reach the desired cooking time.
3. Press "STAGE" again to program a third stage of cooking.
The LED display will show default cooking temperature ("360F"),
“temp”, and “stage 3”.
• To adjust the cooking temperature for stage 3, press "+" or "-"
to reach the desired temperature.
STAGE