NuWave Brio - Page 24

24
Owner's Manual
OPERATING INSTRUCTIONS (Continued)
Program Function
Preset Programs: Preset Programs given numbers 1~100. The
user CANNOT adjust these programs.
1. Press "ON/OFF". The LED display will show “360F” and “temp”.
2. Press "PROG". The LED display will show “prog” and “1”.
• Preset program numbers can be chosen between 1 and 100.
• Continue to press "+" or "-" until the desired number is
reached.
3. Press "START/PAUSE". The Brio will begin cooking following the
programmed recipe.
Note: Refer to Program Menu Items for preprogrammed recipes
1-100.
Store 101-200 presets. Option 1: Enter cooking recipe rst.
1. Press "ON/OFF". The LED display will show “360F” and “temp”.
2. Press "COOK TEMP". Press "+" or "-" to adjust the temperature
higher or lower. The LED display will show “temp” and the set
cooking temperature.
3. Press "COOK TIME". Press "+" or "-" to adjust the time.
The LED display will show “time” and the set cooking time.
4. Press "STAGE". The LED display will show default cooking
temperature ("360F"), “temp” and “stage 2”.
• To adjust the cooking temperature for stage 2, press "+" or "-"
to reach the desired temperature.
• Adjust cooking time by pressing "COOK TIME". The LED
display will show “time”, “stage 2", and “00:00”. Press "+" or "-"
to reach the desired cooking time.
5. Press "STAGE" again to program a third stage of cooking.
The LED display will show default cooking temperature ("360F"),
“temp”, and “stage 3”.
• To adjust the cooking temperature for stage 3, press "+" or "-"
to reach the desired temperature.
• Adjust cooking time by pressing "COOK TIME". The LED
display will show “time”, “stage 3", and “00:00”. Press "+" or "-"
to reach the desired cooking time.
• A maximum of 5 stages can be programmed.
6. Press "PROG". The LED display will show “prog” and “101”.
7. Press "+" or "-".
• Program numbers can be chosen between 101 and 200.
• Continue to press "+" or "-" until the desired number
is reached.
PROG