25
Owner's Manual
8. Press "PROG" again to save the recipe to the desired
program number.
9. Press "START/PAUSE". The Brio will begin cooking following the
programmed recipe.
Option 2. Save the program after cooking has completed.
After completing a cooking cycle, it can be saved as a program.
1. When cooking is complete, press "PROG". The LED display will
show “prog” and “000”.
2. Press "+" or "-". The LED display will show “101”.
Program numbers can be chosen between 101 and 200.
• Continue to press "+" or "-" until the desired number
is reached.
3. Press "PROG" again to save the recipe to the desired
program number.
Memory Recall
1. Press "PROG". The LED display will show “prog” and “000”.
2. Press "+" or "-". The LED display will show “101”.
Program numbers can be chosen between 101 and 200.
• Continue to press "+" or "-" until the desired saved program
number is reached.
3. Press "START/PAUSE". The Brio will cook following the
programmed recipe.
Editing and Modifying a Saved Program
1. Recall the program to edit. Press "STAGE" until the stage to edit
is reached.
2. Press "COOK TEMP". Press "+" or "-" to adjust the temperature
higher or lower. The LED display will show “temp” and the new
set cooking temperature.
3. Press "COOK TIME". Press "+" or "-" to adjust the time. The LED
display will show “time” and the new set cooking time.
• If another cooking stage needs to be edited, press "STAGE"
until the stage to edit is reached then repeat steps above.
• To save the edited program, press "START/PAUSE", or
press "PROG" and follow the programmed recipe steps
mentioned earlier.
OPERATING INSTRUCTIONS (Continued)
To Next Page
Loading...
