Nvidia SHIELD TABLET K1 - Initial Device Charging

Copyright © 2015 NVIDIA Corporation
Power button
Volume button
MicroSD Slot. Accepts up 128 GB MicroSD card.
Bass reflex port
Magnetic slots for the snap-on cover. The cover is sold separately.
Micro-USB port to connect the Micro-USB-to-USB cable to charge the SHIELD tablet K1
Mini-HDMI port for connecting the tablet to an external display
Headphone jack (3.5 mm)
Front camera
Speaker
Rear camera located on the back corner of the tablet
Get Started
Your SHIELD tablet K1 should arrive with at least a 50 percent charge in the battery. However, if the battery level is low or
empty, we recommend that you charge your device for two hours before you begin the setup process. Your SHIELD tablet
K1 does not include a charger and cable. You need a micro-USB-to-USB cable with an AC adapter. An NVIDIA World
Charger Is available for purchase.
How to Charge Your SHIELD Device
1. Plug the micro-USB end of a micro-USB-to-USB cable into the micro-USB port
of the SHIELD tablet K1 .
2. Plug the standard USB end of the USB cable into a USB power source, such as an
AC adapter or a USB port on a computer.
NOTE You can use the SHIELD tablet K1 while the device is plugged into your computer or other power
source. However, when the device is in use, the charging time is extended.