NVR SYSTEMS 4-CH - Page 23

23
 Net Mask – Net Mask for the Ethernet IP address. Please follow the Text Input method
described in Section 4.1 to modify these items.
 Gateway – Ethernet Gateway IP address. Please note that the priority of Gateway is (1)
Ethernet Gateway and (2) 3G Gateway. Please follow the Text Input method described in
Section 4.1 to modify these items.
 DNS – DNS (Domain Name Server) IP address for Ethernet. Please follow the Text Input
method described in Section 4.1 to modify these items.
 PPPoE Username – PPPoE username for the system if PPPoE is used. Please follow the
Text Input method described in Section 4.1 to modify this item.
 PPPoE Password – PPPoE password for the system if PPPoE is used. Please follow the
Text Input method described in Section 4.1 to modify this item.
 DDNS Type – Dynamic, Static, Custom DDNS (Dynamic Domain Name Server) type, etc.
Please contact your local DDNS Service Provider to get the DDNS URL, username, and
password.
 URL – the URL (Uniform Resource Locators) for the system. Please follow the Text Input
method described in Section 4.1 to modify this item.
 DDNS Username – DDNS username for the DVR for Static IP, PPPoE, or DHCP. Please
follow the Text Input method described in Section 4.1 to modify this item.
 DDNS Password – DDNS password for the DVR for Static IP, PPPoE, or DHCP. Please
follow the Text Input method described in Section 4.1 to modify this item.
Note:
If DDNS Type is FreeDNS, the URL must be appended with “,hash”.
Click "Dynamic DNS" on the FreeDNS website (http://freedns.afraid.org), then click
"Direct URL" to get the URL. In the URL, the value after the ? is the "hash" value.
The full URL that inputs to DVR is the domain name that you set, hash.
The full URL must be less than 70 letters.
 Notification – press Notification (Mouse: Left click) to call up Notification Setup.
Please refer to Section 5.5.1 for the details.
 FTP – press FTP (Mouse: Left click) to call up FTP Setup. Please refer to Section 5.5.2 for
the details.
 4G/3G – press 4G/3G (Mouse: Left click) to call up 4G/3G Modem Setup. Please refer to
Section 5.5.3 for the details.
 Advanced – press Advanced (Mouse: Left click) to call up Advanced Network Setup.
Please refer to Section 5.5.4 for the details.
 LAN – press LAN (Mouse: Left click) to call up LAN Setup. Please refer to Section 5.5.5
for the details.