NVR SYSTEMS 4-CH - 5.5.4 Advanced Network Setup

27
5.5.4 Advanced Network Setup
In Network Setup, press Advanced to call up Advanced Network Setup as shown.
The Advanced Network Setup allows the administrator to set advanced network
parameters. If the user is not familiar with network administration, please DO NOT
modify the items in this dialog.
The general operations are as below:
 Mouse: Click in the respective item
Select the items to set.
 X (Mouse: Left Click X or Right Click to leave)
Press this button to escape from this screen, and return to Network Setup display. If the
Save dialog is shown, press YES to exit and save, CANCER to exit without saving.
Following is a brief description for each item and its specific operations:
 Control Port – the control port for remote access. The default value is 67. Please follow
the Text Input method described in Section 4.1 to modify this item.
 Data Port – the data port for remote access. The default value is 68. Please follow the
Text Input method described in Section 4.1 to modify this item.
 HTTP Port – the HTTP (web page) port for remote access. The default value is 80.
Please note that value 0 means to disable HTTP.