NVR SYSTEMS 4-CH - 5.5.2 FTP Setup

25
5.5.2 FTP Setup
In Network Setup, press FTP to call up FTP Setup as shown.
The FTP Setup allows the administrator to set FTP related parameters. When an event
occurs and FTP is enabled for the action, the recorded video/audio for that event will be
sent to the FTP server based on the parameters set here.
The general operations are as below:
 Mouse: Click in the respective item
Select the items to set.
 X (Mouse: Left Click X or Right Click to leave)
Press this button to escape from this screen, and return to Network Setup display. If the
Save dialog is shown, press YES to exit and save, CANCER to exit without saving.
Following is a brief description for each item and its specific operations:
 FTP Server – FTP server web/IP address with or without directory path. Please follow
the Text Input method described in Section 4.1 to modify this item.
 FTP Port – the FTP port. The default value is 21. Please follow the Text Input method
described in Section 4.1 to modify this item.
 Username – username for this DVR unit in the FTP server. Please follow the Text Input
method described in Section 4.1 to modify this item.
 Password – password for this DVR unit in the FTP server. Please follow the Text Input
method described in Section 4.1 to modify this item.
 Prefix Of Filename – the prefix of the filenames for the files sent to the FTP server. If
it’s empty, the filenames will be “cam..”; if not, the filenames will be “Prefix-cam..”.
For example, if the prefix is “DVR01”, then the filenames will be “DVR01-cam..”. Please
follow the Text Input method described in Section 4.1 to modify this item.