Date & Time – system date and system time.
Display Format – format used for the system time displayed on the lower-right corner
of the main screen.
Reboot Cycle – It can be set to restart the device according to the schedule of N/A,
Daily, Weekly, and Monthly.
Video System – NTSC or PAL.
Language – Select the language for the system. The languages supported include:
English, Simplified Chinese, Traditional Chinese, etc.
Protection Key – the protection key for the remote access of the system. Please
follow the Text Input method described in Section 4.1 to modify these items.
Note: This protection key will be used for authentication when any remote station
wants to connect with the system from Ethernet interface, either LAN or
internet. So, the same protection key must be entered to install the remote
software if it is to be used to access the system.
Factory Reset – reset all the settings to factory default values.
Backup –backup the configurations and QR code image of this unit to the
corresponding USB device. The user may enter the directory to back up the
configurations to.
Note: The QR code image can be used to connect to device via select this image
from HEM device list.
Restore – restore the configuration files in the corresponding backup device to this
unit. The user may enter the directory to restore the configurations from.
Software Upgrade – press OK (Mouse: Left click) to start the upgrade process when
the highlighted file is a correct upgrade file. A confirmation dialog will be shown on
the screen. Press YES to confirm to upgrade the system software.
Note : After the software is upgraded, the system will restart immediately. The
split window display will be shown after restart, please wait a moment.
To Next Page
Loading...