NXP Semiconductors MPC5777M - Page 21

Electrical characteristics
MPC5777M Microcontroller Data Sheet, Rev. 6
NXP Semiconductors 21
V
DD_HV_IO_EBI
SR External Bus Interface supply
voltage
—–0.36.0V
V
DD_LV_BD
–V
DD_LV
SR Emulation module supply
differential to 1.2 V core supply
—–0.31.5V
V
IN
SR I/O input voltage range
12
—–0.36.0V
Relative to V
SS_HV_IO
13,14
–0.3 —
Relative to V
DD_HV_IO
13,14
—0.3
I
INJD
SR Maximum DC injection current for
digital pad
Per pin, applies to all digital
pins
–5 5 mA
I
INJA
SR Maximum DC injection current for
analog pad
Per pin, applies to all analog
pins
–5 5 mA
I
MAXD
SR Maximum output DC current when
driven
Medium 78mA
Strong –10 10
Very strong –11 11
I
MAXSEG
SR Maximum current per power
segment
15
— –90 90 mA
T
STG
SR Storage temperature range and
non-operating times
— –55 175 °C
STORAGE SR Maximum storage time, assembled
part programmed in ECU
No supply; storage
temperature in range –40 °C
to 60 °C
— 20 years
T
SDR
SR Maximum solder temperature
16
Pb-free package
——260°C
MSL SR Moisture sensitivity level
17
——3—
t
XRAY
SR X-ray screen time
18
At 160 KeV at max 5 mm — 3 min
1
Functional operating conditions are given in the DC electrical specifications. Absolute maximum ratings are stress
ratings only, and functional operation at the maxima is not guaranteed. Stress beyond the listed maxima may affect
device reliability or cause permanent damage to the device.
2
Allowed 1.45 – 1.5 V for 60 seconds cumulative time at maximum T
J
= 150 °C, remaining time as defined in note 3
and note 4
3
Allowed 1.38– 1.45 V– for 10 hours cumulative time at maximum T
J
= 150 °C, remaining time as defined in note 4
4
1.32 – 1.38 V range allowed periodically for supply with sinusoidal shape and average supply value below 1.326 V at
maximum T
J
=150°C.
5
Allowed 5.5–6.0 V for 60 seconds cumulative time with no restrictions, for 10 hours cumulative time device in reset,
T
J
= 150 °C, remaining time at or below 5.5 V.
6
V
DD_HV_IO
applies to V
DD_HV_IO_MAIN
, V
DD_HV_IO_FLEX
, V
DD_HV_IO_FLEXE
, V
DD_HV_IO_JTAG
, and V
DD_HV_IO_EBI
I/O
power supplies.
7
Allowed 3.6–4.5 V for 60 seconds cumulative time with no restrictions, for 10 hours cumulative time device in reset,
T
J
= 150 °C, remaining time at or below 3.6 V.
8
Includes ADC grounds V
SS_HV_ADV_S and
V
SS_HV_ADV_D
.
Table 6. Absolute maximum ratings
1
(continued)
Symbol Parameter Conditions
Value
Unit
Min Max