'Legend position'
When you set 'Automatic detection of the legend' in the default template, the system
analyzes the image to find the location of the legend (within the 'Timeout' limits). It
shows the selected corner in the 'Image Orientation' preview.
When needed, adjust the 'Legend position' to get the legend on top of the folded packet,
in case of folding. You can:
■
Keep the default setting: 'Match CAD standard' to place the legend according to the
selected standard:
- 'DIN': legend located at the bottom right of the image
- 'ERICSSON': legend located at the top left of the image
- 'AFNOR': legend located at the bottom right of the image
■
Manually select the 'Legend position' in the image by selecting a corner of the image.
■
Select 'No legend' when the document has no legend and will not be folded.
Chapter 5 - The Océ Publisher Copy option128
'Image Properties'
To Next Page
Loading...
