Oce TC4 - Stopping a Scan-to-File Job

Stop a scan-to-file job
Introduction
You can stop a scan-to-file job with the red stop key at the scanner operator panel.
How to stop a scan-to-file job
1.
Press the red stop key.
Result
When you press the red stop key while the scanner scans, the scan process stops. The
scanner rewinds the original and the scan-to-file job is cancelled.
When you press the red stop key while the scanner rewinds, the rewind process continues.
The scan-to-file job is cancelled.
Chapter 2 - Use the Océ TC4 37
Stop a scan-to-file job