Oce TC4 - Extended Scan-to-File Jobs

Extended scan-to-file jobs
Available settings for scan-to-file jobs
The scan-to-file settings
#
DescriptionSetting
Use this setting to define the default destination for scan-
to-file jobs on the controller. You can define a maximum
of 10 remote destinations and one of these destinations
is the default destination.
'Destination'
Depending on the color mode and file type you select
the values for the compression mode and organization
will change. For some File types, the Compression and
Organization settings cannot be set in all situations.‘'File
type'’ on page 40
Available file types:
■
PDF
■
TIFF
■
JPEG
■
CALS
'File type'
Use this setting to define the resolution of the scanned
images. The higher the resolution you select, the finer
the image quality but the larger the file size. ‘'Resolution'’
on page 42
'Resolution'
Use this setting to define the type of original for your
scan-to-file jobs. The defined type influences the quality
of the output.‘'Original type' and background compensa-
tion’ on page 43
'Original type'
Use this setting to define the width of the original that
the scanner scans.‘'Original width'’ on page 44
'Original width'
Use this setting to define blank areas on the sides of the
scanned image. ‘'Remove strip'’ on page 45
'Remove strip'
Chapter 2 - Use the Océ TC438
Available settings for scan-to-file jobs