'Advanced' / 'Media' settings
Introduction
For each scanned original in the job, the system automatically selects the most appropriate
media to be used for printing, according to:
■
Automatically applies the default print settings defined in the template
■
The size of the image in the document
■
The folder value
You can manually pick out the media to be used if either:
■
When the system does not find an appropriate media
■
You want to use another media than the one selected by the application, or
■
When you have changed some print settings in the file (the 'Scale factor', the 'Orien-
tation of the image on the media '...).
Chapter 5 - The Océ Publisher Copy option 133
'Advanced' / 'Media' settings
To Next Page
Loading...
Need help?
General
