Concept of the 'Templates' on the scanner
'Templates'
With a template you can pre-define the settings you need for a scan job. This way you
can store a number of settings that are often used. The pre-defined settings are saved in
a template. The template can be selected on the scanner operator panel. The scanner
operator panel of the scanner offers 5 scan-to-file templates.
For each template you can define the following items.
Template details#
DescriptionName
Give each template a unique name.'Template
name'
Give additional information about the template and / or its settings.'Template de-
scription'
Allows you to display the settings in the order that you prefer. When
you can place the settings you use most often at the top of the list
you avoid the need to scroll through the list of settings.
'Top 5 set-
tings'
Allows you to set the values for each setting, used in the template.Individual set-
tings
Chapter 4 - The Océ TC4 Power Logic
®
controller application
95
Concept of the 'Templates' on the scanner
To Next Page
Loading...
