Oce TC4 - Retrieving Files via FTP

How to retrieve scanned files via FTP
Introduction
The scanned files are stored in the logging directory of the controller. You can retrieve
your files from the local host via File Transfer Protocol (FTP). FTP retrieval can be done
in the following ways.
■
Via an internet browser
■
Via an FTP application, or
■
Via a command line prompt.
When you scan to file, your files will be stored in the destination you set. This can be on
the local controller (1) or on a remote system (2). You can retrieve your files from the
local host via File Transfer Protocol (FTP). Also if during scanning to a remote destination,
something goes wrong, you can retrieve your files from the local host.
1
2
[35] How to retrieve scan files
Chapter 2 - Use the Océ TC4 59
How to retrieve scanned files via FTP