3.
Define the job settings.
[16] The top 5 settings of a scan job template
‘Available settings for scan-to-file jobs’ on page 38
■
Scroll to a setting.
■
Select a setting with the left softkey.
■
Scroll to the required value.
■
Select the next setting with the left softkey.
■
Scroll to the required value.
■
Select 'Close' to close the setting.
■
Repeat the selection of settings from bullet 3 if you need to define more settings.
4.
Press the green 'Start' key.
Result
The scanner scans the original and sends the scanned file to the defined scan-to-file des-
tination.
Chapter 2 - Use the Océ TC436
Do an extended scan-to-file job
To Next Page
Loading...
