[32] Scan jobs workspace
Scan destinations on the controller
In this area of the workspace you find the default destination of the scan jobs. By default,
all the scan jobs are stored on the controller. The default scan job destination cannot be
deleted.
Use the toolbar at the top of the 'Scan jobs' workspace to create, edit and delete the local
scan job destinations on the controller.
The Scan destination area also gives access to the Unsent scan jobs folder. These jobs
must go to a remote destination but cannot be delivered. The jobs are temporarily stored
in the Unsent scans folder on the controller.
Remote destinations
You can create scan job destinations at a remote location instead of at a local destination
on the controller. The remote scan destinations area displays the remote destinations that
you create. The remote destination is a directory on a workstation that is accessible through
the network.
Use the toolbar at the top of the 'Scan jobs' workspace to create, edit and delete the remote
scan job destinations.
Chapter 2 - Use the Océ TC4 47
Scan jobs management
To Next Page
Loading...
