Oce TC4 - Page 55

Manual file name definition
1.
Select a destination in the 'Scan jobs' workspace.
2.
Open the ‘File’ menu and select ‘Properties’. The ‘properties’ window appears.
3.
Check or uncheck the check box ‘Add the appropriate file extension’ to add or leave out
the file extension. Set the file extension in the 'Preferences' workspace of the Power Logic
®
controller application.
4.
Enter a name in the ‘Base name’ text box. Remove the ‘###’ part, this part is used for
automatic file naming. You can put dots in the ‘Base name’.
5.
Click ‘Apply’ to accept the destination properties. The ‘properties’ window stays open
and is ready for the next scan-to-file action after the current original is scanned.
6.
Scan the original.
7.
Repeat step 4, 5 and 6 for each original.
Chapter 2 - Use the Océ TC4 55
Define file names