Oceanic GEO 2 - Backlight Functionality; Menu Navigation Button Actions

13
Menu button action >>
A (< 2 sec) - to access and step forward through menu selections
A (hold) - to scroll forward through menu selections
M (< 2 sec) - to step backward through menu selections
M (2 sec) - to revert to Main, or move between Watch and DC modes
S (< 2 sec) - to access or save selections
S (2 sec) - to step back to previous selection
Pressing A (< 2 sec) while viewing the last selection in the menu will revert to the first selec-
tion (such as Watch or Surface Main).
Pressing M (< 2 sec) while viewing the Surface Main will jump to the last menu selection
(such as Set T or SN), then continued presses will step back through menu items.
BACKLIGHT
To activate the Backlight at any time >> press the L button.
• The Backlight will activate and illuminate the display for button depression time* plus
the Duration time set (0, 5, or 10 seconds), for a maximum of 20 seconds.
(*The Backlight will turn Off if L is depressed for more than 10 seconds.)
• Press L again to activate as desired.
Extensive use of the backlight reduces estimated battery life. Also,
the backlight does not operate during a low battery condition or
when the GEO 2 is connected to a PC.