Oceanic GEO 2 - Setting Tissue Loading Bar Graph (TLBG) Alarm; Setting Dive Time Remaining (DTR) Alarm

53
Set TLBG Alarm, information includes (Fig. 49):
> Graphics SEt and TBG (Tissue Bar Graph)
> Graphic OFF or TLBG segments with icon flashing
• A (< 2 sec) - to step upward through Set Points from OFF to
1 through 4 segments one at a time.
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the setting and access Set DTR Alarm.
• S (2 sec) - to revert to Set EDT Alarm.
Set DTR Alarm, information includes (Fig. 50):
> Graphics SEt and DTR -
> Time Value (min) flashing with min icon
• A (hold) - to scroll upward through Set Points at a rate of 8
per second from OFF to 5 through 20 (min) in increments
of 1 min.
• A (< 2 sec) - to step upward through Set Points one at a
time.
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the setting and access Set PO2 Alarm.
• S (2 sec) - to revert to Set TLBG Alarm.
Fig.49-SETTLBGAL
Fig.50-SETDTRAL