Oceanic GEO 2 - Set U Menu (Utilities) Configuration; Setting PO2 Alarm

54
Fig.51-SETPO2AL
Set PO2 Alarm, information includes (Fig. 51):
> Graphic SEt with PO2, MAX, and Nx icons
> PO2 value ATA (atmospheres absolute) flashing
• A (< 2 sec) - to step upward through Set Points from 1.20 to
1.60 one at a time.
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the setting and revert to Set A Lead-in.
• S (2 sec) - to revert to Set DTR Alarm.
SET U MENU (UTILITIES)
Sequence >> Lead-in >> Wet >> Units >> DS* >> SS* >> Algo* >> CF*
>> Glo >> SR
*Items apply to NORM only.
Set Points remain as set until changed.
Set U Lead-in, information includes (Fig. 52):
> Graphics SEt and U
• A (< 2 sec) - to step forward to Set T Lead-in.
• M (< 2 sec) - to step back to Set A Lead-in.
• S (< 2 sec) - to access Set Wet.
Fig.52-SETULEAD-IN