Scanning Methods
-103-
Scanning
4
3 When you have selected all the
destinations, press the .
4
Check that [
Complete
] is selected and
then press
.
5 Press the to return to start screen.
Direct Input
You can enter a destination directly using the
onscreen keyboard.
1 Press the to select [Direct Input] and
then press .
2 Enter a destination e-mail address up to
80 characters.
Reference
z For how to enter texts, refer to "Entering Text Using the
Operator Panel" P. 26.
3 Select [Enter] and then press .
4 Press the to return to start screen.
Using LDAP Search
You can search for a destination from the list on
the LDAP server.
You can select either [
Simple Search
] or
[
Advanced Search
] for the method of searching.
[Simple Search] only searches for a single
keyword as a username. Also, with Simple
Search you can only search for character strings
included in usernames. You cannot search for
character strings in e-mail addresses.
When you select [Advanced Search], you can
search for a user name or e-mail address. You
can also select search conditions to retrieve only
results that contain all the specified keywords.
Reference
z For the LDAP server setting, refer to User's Manual
Advanced.
For Simple Search
1 Press the to select [LDAP] and then
press .
2 Check that [Simple Search] is selected
and press .
3 Enter a keyword to search for a user
name on the LDAP server.
4 Select [Enter] and then press to start
searching.
5 When the search results appear, press
the to select the destination you want
and then press .
The check box is selected. You can select multiple
entries.
6 When you have selected all the
destinations, press the .
7 Check that [Complete] is selected and
then press .
8 Press the to return to start screen.
For Advanced Search
1 Press the to select [LDAP] and then
press .
2 Press to select [Advanced Search]
and then press .
3 Check that [Simple Search] is selected
and press .
4 Select either [OR] or [AND] and
press .
5 Press , select [User Name], and then
press .
6 Enter the keyword to search for.
7 Select [Enter] and then press .
8 Press , select [E-mail Address], and
then press .
9 Enter the keyword to search for.
10 Select [Enter] and then press .
11 Press to start searching.
12 When the search results appear, press
the to select the destination you want
and then press .
The check box is selected. You can select multiple
addresses.
13 When you have selected all the
destinations, press the .
14 Check that [Complete] is selected and
then press .
15 Press the to return to start screen.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
To Next Page
Loading...
