Basic Settings for Faxing (for MB471, MB491, ES4191 MFP only)
-45-
Setup
1
12
When the setup menu screen is displayed,
press to complete the setup.
PBX Connecting
When connecting to PBX (internal exchange), put
[PBX Line] to [ON].
1 Press the <SETTING> key.
2 Press the to select [Admin Setup]
and then press .
3 Enter the administrator password.
The default password is "aaaaaa".
4 Select [Enter] and then press .
5 Press the to select [Fax Setup] and
then press .
6 Press the to select [Fax Setting] and
then press .
7 Press the to select [PBX Line] and
then press .
8 Press the to select [ON] and then
press .
9 Press the until the top screen appears.
Setting for Super G3
1 Press the <SETTING> key.
2 Press the to select [Admin Setup]
and then press .
3 Enter the administrator password.
The default password is "aaaaaa".
4 Select [Enter] and then press .
5 Press the to select [User Install] and
then press .
6 Press the to select [Super G3] and
then press .
7 Press the to select [OFF] and then
press .
8 Press the until the top screen appears.
Specifying Reception Mode
Depending on your environment of the machine,
the optimal reception mode is different. Check
with the following description.
z Fax Ready Mode
This mode is recommended when you use the
machine as a fax machine.
z Tel/Fax Ready Mode
This mode is recommended when you connect an
external phone to the machine.
z Ans/Fax Ready Mode
This mode is recommended when you connect an
external answering machine to the machine.
z Tel Ready Mode
This mode is recommended when you mostly use
an external phone connected to the machine.
z DRD
This mode is recommended when you use the
distinctive ring detection (DRD) function provided
by a telephone company.
1 Press the <SETTING> key on the
operator panel.
2 Press the to select [Admin Setup]
and press .
3 Enter the administrator password.
The factory default password is "aaaaaa".
4 Select [Enter] and press .
5 Press the to select [User Install] and
press .
6 Press the to select [Reception Mode]
and press .
7 Press the to specify the reception
mode and press .
8 Press the until the fax start screen
appears.
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
Settable Reception Mode:
Fax Ready Mode* Tel/Fax Ready Mode
Ans/Fax Ready Mode Tel Ready Mode DRD
*indicates the factory default.
OK
OK
OK
OK
OK
To Next Page
Loading...
