Oki MB491 - Printer Driver Configuration

Installing Options
-23-
Setup
1
Printer Driver Configuration
Note
z You must be logged in as an administrator to complete this
procedure.
z If the following conditions are met for Mac OS X, it is not
necessary to configure the printer driver, as the configured
option information is automatically taken from the
machine.
-USB connection
- When options have been configured on the machine
prior to installing the driver, where there is a connection
to a network using EtherTalk
z Windows PCL XPS printer driver is not available for
Windows Vista, Windows Server 2008, Windows Server
2003, and Windows XP.
Reference
z The printer driver needs to be installed on the computer
before doing this procedure. For details on how to install the
printer driver, refer to "Connecting to a Computer" P. 46.
 For Windows PCL/PCL XPS Driver
1 Click [Start] > [Devices and Printers].
2 Right-click the OKI MB491 icon and
select [Printer properties]. (If you
have installed multiple printer drivers,
select [Printer properties] >[OKI
MB491(PCL)] or [OKI MB491(PCL
XPS)]).
3 Select the [Device Options] tab.
4 For the network connection, select [Get
Printer Settings].
For the USB connection, check [ Lower Cassette ].
5 Click [OK].
 For Windows PS Driver
1 Click [Start] > [Devices and Printers].
2 Right-click the [OKI MB491(PS)] icon
and then select [Printer properties].
(If you have installed multiple printer
drivers, select [Printer properties] >
[OKI MB491(PS)].)
3 Select the [Device Settings] tab.
4 For the network connection, select [Get
installed options automatically]
under [Installable Options], and then
click [Setup].
For the USB connection, select [Installed] for
[Second tray] under [Installable Options].
5 Click [OK].
 For Mac OS X PCL/PS Driver
(Mac OS X 10.5 to 10.7)
1 Select [System Preferences] from the
Apple menu.
2 Click [Print & Scan] (For Mac OS X 10.5
and 10.6:[Print & Fax]).
3 Select the name of your machine and
then click [Options & Supplies].
4 Select the [Driver] tab.