Connecting to a Computer
-55-
Setup
1
15 Check that the name of your machine is
displayed in [Printer List], and then
close the window.
16 From the [Go] menu, select
[Applications] > [TextEdit].
17 Select the [File] menu > [Page setup].
18 Select the name of your machine from
[Format for].
19 Check that [OKI MB491(PS)] or [OKI
MB491(PCL)] is displayed correctly
under [Format for].
20 Click [OK].
21 Remove "Software DVD-ROM" from the
computer.
The installation is complete.
USB Connection
Perform the following procedure to connect your
machine to a computer via USB.
Connecting a USB Cable
1
Prepare a USB cable.
A USB cable is not supplied with your machine.
Prepare an USB 2.0 cable separately.
Memo
z Use a USB 2.0 Hi-Speed cable for a USB 2.0 Hi-Speed
connection.
2 Hold down the power switch for about a
second to turn on the power and the
computer.
Reference
z "Turning Off Your Machine" P. 20
3 Plug one end of the USB cable into the
USB interface connector on the back of
the machine.
4 Plug the other end of the USB cable into
the computer's USB interface connector.
Note
z For Windows OSs, do not plug the other end of the
USB cable into the computer until prompted during
driver installation.
Note
z Do not plug the USB cable into the network interface
connection. Doing so may damage your machine.
2
To Next Page
Loading...
