Oki MB491 - Using Bonjour

Connecting to a Computer
-53-
Setup
1
19 Click [OK].
20 Remove "Software DVD-ROM" from the
computer.
The installation is complete.
 Using Bonjour
(For Mac OS X 10.5 to 10.7)
Then, install the driver in the computer and set
the machine as a network printer.
Install the driver in the computer.
1 Ensure that your machine and the
computer are turned on and connected.
Reference
z "Connecting an Ethernet Cable" P. 47
2 Insert "Software DVD-ROM" into the
computer.
3 Double-click the [OKI] icon on the
desktop.
4 Double-click [Driver] folder > [PS] or
[PCL] folder > [Installer for MacOSX].
5 Enter the administrator's password, and
then click [OK].
Follow the instructions displayed on the screen to
complete the installation.
6 From the Apple menu, select [System
Preferences].
7 Click [Print & Scan] (For Mac OS X 10.5
and 10.6:[Print & Fax]).
8 Click [+].
9 Click [Default].
10 Select the name of your machine whose
[Kind] is [Bonjour], and then check
that [OKI MB491(PS)] or [OKI
MB491(PCL)] is displayed in [Print
Using].
The name of your machine is displayed with the
format of "OKI-MB491- (the last six digits of the
MAC address)".
11 Click [Add].
12 If the [Installable Options] window is
displayed, click [Continue].
If you have installed the optional second tray unit
before the driver installation, configure each item
and then click [Continue].
13 Check that your machine is displayed in
[Printers] and [OKI MB491(PS)] or
[OKI MB491(PCL)] is displayed in
[Kind].