Oki MB491 - Page 52

Connecting to a Computer
-52-
3 Select [Network Port Configurations]
from [Show], and then check that
[Built-in Ethernet] is selected.
4 Select [Built-in Ethernet] from [Show]
and select the [AppleTalk] tab, and
then check that [Make AppleTalk
Active] is selected.
5 Close [Network].
6 Insert "Software DVD-ROM" in the
computer.
7 Double-click the [OKI] icon on the
desktop.
8 Double-click [Driver] folder > [PS] Or
[PCL] folder > [Installer for Mac OSX].
9 Enter the administrator's password, and
then click [OK].
Follow the instructions displayed on the screen to
complete the installation.
10 From the [Go] menu, select [Utilities]
and then double-click [Printer Setup
Utility].
Note
z If [Printer Setup Utility] is already running, close it
and open it again.
11 Click [Add].
If the [You have no printers available] dialog
box appears, click [Add].
12 Select the name of your machine whose
[Connection] is [AppleTalk], and then
check that [OKI MB491(PS)] is
displayed in [Print Using].
13 Click [Add].
14 Check that the name of your machine is
displayed in [Printer List], and then
close the window.
15 From the [Go] menu, select
[Applications] and then double-click
[TextEdit].
16 Select the [File] menu > [Page Setup].
17 Select the name of your machine from
[Format for].
18 Check that the [OKI MB491(PS)] is
displayed correctly under [Format for].