Oki MB491 - Page 58

Connecting to a Computer
-58-
12 Close [Print & Scan](Mac OS X 10.5
and 10.6:[Print & Fax]).
13 Remove "Software DVD-ROM" from the
computer.
The installation is complete.
 For Mac OS X 10.4.0 to 10.4.11
Memo
z The procedure below uses Mac OS X 10.4.11 as an
example. Depending on your OS, the description may be
different.
1 Ensure that your machine and the
computer are turned on and connected.
Reference
z "Connecting a USB Cable" P. 55
2 Insert "Software DVD-ROM".
3 Double-click the [OKI] icon on the
desktop.
4 Double-click [Driver] folder > [PS] or
[PCL] folder > [Installer for Mac OS
X].
5 Enter the administrator's password, and
then click [OK].
Follow the instructions displayed on the screen to
complete the installation.
6 From the [Go] menu, select [Utilities],
and then double-click [Printer Setup
Utility].
Note
z If [Printer Setup Utility] is already running, close it
and open it again.
7 Click [Add].
If the [You have no printers available] dialog
box appears, click [Add].
Note
z If the name of your machine whose [connection] is
[USB] is already displayed, select it and click
[Delete], and then click [Add].
8 Select the name of your machine whose
[Connection] is [USB], and then check
that [OKI MB491(PS)] or [OKI
MB491(PCL)] is displayed in [Print
Using].
9 Click [Add].
10 Check that the name of your machine is
displayed in [Printer List], and then
close the window.
11 Remove "Software DVD-ROM" from the
computer.
The installation is complete.