CONFIRMING JOB STATUS
- 102 -
Confirming trays
You can confirm the size and type-setting of the paper or the
amount remaining in the trays. During printing you can confirm
which tray is feeding paper.
1
Press [JOB STATUS] on the touch panel.
2
Press the [SUPPLY] tab.
During printing, the button for the tray from which the
paper is fed is highlighted.
Press [CLOSE] when you finish the confirmation. The
menu returns to the one shown before you pressed [JOB
STATUS].
When the paper in the tray has run out during printing, [JOB
STATUS] on the touch panel blinks. In this case, press [JOB
STATUS] so that the menu for displaying the printing status will
appear and the button for the tray whose paper has run out will
blink on this menu. Printing resumes when you add paper to
this tray.
Confirming amount of toner remaining
You can confirm the approximate amount of toner remaining in
the toner cartridge.
1
Press [JOB STATUS] on the touch panel.
2
Press the [TONER] tab.
Press [CLOSE] when you finish the confirmation. The
menu returns to the one shown before you pressed [JOB
STATUS].
To Next Page
Loading...
Need help?
General
