Oki MB770dn - Setting up the Ad Hoc Mode

SETTING ITEMS (ADMIN)
- 280 -
2
1
3
4
5
6
7
4
Press [YES], and wait until the setting is
reflected.
Setting up the Ad Hoc Mode
The wireless settings can be operated from the Control Panel
of this equipment.
When setting up the equipment for the wireless network in the
Infrastructure Mode, follow the steps below.
1. Select the network type
 P.271 "Select network type"
2. Specify the SSID
 P.272 "Specify SSID"
3. Select the security mode
 P.273 "Select security mode"
 Select network type
First access the WIRELESS SETTING screen from the ADMIN
menu from the Touch Panel Display to select the network type
for the wireless network.
Note
• If you are not sure what network type to select, see the
following section to determine the network type first.
1
Press [SETTING] button on the control
panel to enter the SETTING menu.
2
Press [ADMIN].
The ADMINISTRATOR PASSWORD screen is displayed.
3
Press [PASSWORD].
The input screen is displayed.
4
Enter the administrator password and
press [OK].
The ADMIN menu is displayed.
5
Press [WIRELESS SETTING].
The WIRELESS SETTING menu is displayed.
6
Press [WIRELESS SETTING].
The WIRELESS SETTING screen is displayed.
7
Press [ON] and press [NEXT].
The NETWORK TYPE screen is displayed.