Oki MB770dn - Managing Print Jobs from the Control Panel

MANAGING PRINT JOBS FROM THE CONTROL PANEL
- 61 -
2
1
3
4
5
6
7
Pausing jobs
On the [JOBS] tab listing the print jobs, select the job that you
want to pause and then press [PAUSE].
The selected job is paused. When a job is paused, the
subsequent jobs on the list will be released earlier.
Resuming paused jobs
Select the job that you want to resume and then press
[RESUME].
 Changing the job order
You can change the order of the jobs by moving them within
the list.
Note
• You can only move jobs from and to those whose status is
“Wait”.
1
On the [JOBS] tab listing the print jobs,
select the job that you want to move in the
list, and then press [MOVE].
If the target job is not displayed on the page, use and
to change between pages.
2
Specify the new position of the job. (The job
will be moved under the job selected here.)