ADVANCED FUNCTIONS
- 116 -
2
Press the [ADVANCED] tab, and then press
[ITU MAILBOX].
This screen is the same as the one you see when you
create the confidential/bulletin board mailbox.
P.114 "Creating the confidential or bulletin board
mailbox"
3
In the “BOX TYPE” group, press
[CONFIDENTIAL], [BULLETIN BD] or
[RELAY]. In the “MODE” group, press [BOX
DELETE], and then [OK].
If the selected mailbox has not been set, an error
message is displayed and you are unable to proceed.
4
Press [BOX NUMBER] to display the entry
screen. Key in the box number, and then
press [OK].
If a password has been set to the selected mailbox, key in
the password in the same way as the box number.
5
The confirmation screen for the deletion is
displayed. Press [YES].
If the box number or password is incorrect, an error
message is displayed and you are unable to proceed.
Chain Dial Communication
You can chain pre-registered sets of numbers to form a dialing
string. For example, you can form the desired number by
specifying sets of numbers registered in the address book
sequentially such as region code, area code and fax numbers.
1
Place the original(s).
2
Press the [FAX] button on the control panel.
3
Press [OPTION] and set the transmission
conditions.
4
Press the [ADVANCED] tab, and then press
[CHAIN DIAL COMM.].
5
Repeat this operation until the desired
number is formed.
You can form the dialing number which is up to 128 digits
in length. The numbers are chained in the order you
specify them.
6
Press [SEND].
Delayed Transmission Reservation
You can send a fax at a specified date and time. It is useful
when you want to make use of off-peak discounts (e.g.
nighttime) or you want to send a fax to a country which has a
time difference.
1
Place the original(s).
2
Press the [FAX] button on the control panel.
3
Press [OPTION] and set the transmission
conditions.
To Next Page
Loading...
Need help?
General
