Oki MB770dn - Initialize Fax; Setting the Country;Region of FAX

SETTING N/W-Fax DRIVER
- 157 -
2
1
3
4
5
6
7
12
Select the position of the image file.
- Select this to align the image to the left.
- Select this to align the image to the center.
- Select this to align the image to the right.
13
Specify the other options to send a
document and click [OK].
14
Click [Print] to send a document to this
equipment.
INITIALIZE FAX
You can set the country or region in which you use this
equipment.
You can also restore the default of the FAX settings.
Note
• You need to reboot this equipment after changing the
country/region or initializing the FAX setting.
Setting the country/region of FAX
1
Press the [SETTING] button on the control
panel to access the SETTING menu.
2
Press the [ADMIN] tab.
3
Press [PASSWORD].
4
Enter the administrator password and
press [OK].
Memo
• If the administrator password has not been changed before,
enter the default administrator password "123456".
• The input password appears as asterisks (*).
• For detail, refer to "Accessing the User Menu" ( P.212)
5
Press [INITIALIZE FAX].
Note
• You cannot perform this operation while a job in
process exists. Perform this operation again after the
job in process is completed.