Oki MB770dn User Manual

SETTING ITEMS (ADMIN)
- 272 -
2
1
3
4
5
6
7
7
Press [ON] and press [NEXT].
The NETWORK TYPE screen is displayed.
8
Press [INFRASTRUCTURE] and press
[NEXT].
9
The SSID SETTINGS screen displayed.
Continue to the procedure for specifying the SSID.
 P.272 "Specify SSID"
 Specify SSID
When you select the Infrastructure Mode for the network type,
you can specify the SSID by selecting the available network list
or manually entering the SSID.
 P.272 "Selecting the SSID from the available network list"
 P.273 "Entering the SSID manually"
Note
• If you are not sure how the SSID must be specified, see the
following section to determine the SSID.
Selecting the SSID from the available network
list
This equipment can search the available SSID automatically
from the wireless network. Then you can select the SSID from
the list.
1
Press [AVAILABLE NETWORK].
The AVAILABLE NETWORK screen is displayed.
2
Select the SSID that this equipment will
connect and press [OK].
The screen returns to the SSID SETTINGS screen.
Note
• The available network may not be displayed according
to the communication environmental conditions.
• If the desired SSID is not displayed, please specify the
SSID manually.
 P.273 "Entering the SSID manually"
• This Wireless LAN supports only channel 1 to 11. This
equipment cannot connect the Access Point that uses
the other channel than these channels. Please make
sure to set the channel between 1 to 11 in the Access
Point.
3
Press [NEXT].

Oki MB770dn Specifications

General

Brand	Oki
Model	MB770dn
Category	All in One Printer
Language	English