SETTING ITEMS (ADMIN)
- 242 -
3
Select the language pack that you want to
install, and press [INSTALL].
The installation confirmation screen is displayed.
4
Press [YES].
The installation begins.
Note
• Do not remove the USB storage device until the data
transfer is complete. Removing the device while data
are being transferred could destroy them or cause a
malfunction of the equipment.
5
When the installation is complete, press
[OK].
You will be returned to the GENERAL menu (2/2).
Memo
• If the installation fails, the message “Installation
Failed.” will be displayed on the CAUTION screen. In
this case, press [CLOSE], and perform the operation
again.
6
Remove the USB storage device from the
USB port on the equipment.
Removing a language
1
On the LANGUAGES screen, select the
language pack that you want to remove,
and press [DELETE].
The deletion confirmation screen is displayed.
Note
• The language packs for English (US), English (UK),
and the default language cannot be removed.
2
Press [YES].
When the language pack is removed, you will be returned
to the LANGUAGES screen.
To Next Page
Loading...
Need help?
General
