SETTING ITEMS (ADMIN)
- 289 -
1
On the CONFIRMATION screen of the
FACTORY DEFAULT screen, press [OK].
The initialization begins.
Note
• If you want to back up the setting data and user data
before initialization, use the cloning function to create
clone files.
For details of the cloning function, see the following
page:
P.244 "Creating or installing clone files"
• When the initialization fails, the message “The process
failed.” will be displayed. In this case, press [CLOSE],
and perform the operation again.
2
Press [OK] to reboot the equipment.
The equipment reboots.
To Next Page
Loading...
