Olympus COBRA - Page 60

DMTA-20006-01EN, Rev. B, February 2014
Chapter 4 54
COBRA-SP-FULL U8775188
Basic spare parts kit, plus links
and the encoder assembly
COBRA-SP-SA15 U8750056
One of each of the eleven wedges
needed for coverage of 21.3 mm to
114.3 mm (0.84 in. to 4.50 in.) pipe
outside-diameter range.
OMNI-A2-SPLIT128 U8100133
Y-adaptor (splitter) to support two
phased array probes on OmniScan
MX2 instruments with PA2 128
elements module.
OMNI-A2-SPLIT64 U8100135
Y-adaptor (splitter) to support two
phased array probes on
OmniScan MX2 instruments with
PA2 64 elements module.
OMNI-A-ADP05 U8767016
Y-adaptor (splitter) with
OmniScan connectors to support
two phased array probes
E128P0-0000-OM U8800428
Phased array cable extensions
required to interface between the
Omni-A-ADP05 and an
OmniScan MX2 instrument with
PA1 128 elements module.
EIB64-NT-0-P-0-OM U8779452
Interbox to support 2 phased array
probes on OmniScan MX2
instruments with PA1 64 elements
module.
WTR-SPRAYER-4L U8775153
4 ℓ manual water pump with
couplant tubes and fittings
Omni-A2-ADP20 U8775201
Scanner interface adaptor to
connect scanners encoder cables
with DE15 connector to
OmniScan MX2 with LEMO
connector scanner interface.
Omni-A-ADP27 U8780329
Scanner interface adaptor to
connect scanners encoder cables
with LEMO connector to
OmniScan MX with DE-15
connector scanner interface.
Table 6 COBRA Scanner ordering part numbers (continued)
Part number Item number Description
Package
COBRA-K-4.5