Function/setting customizing
130
9
SLEEP
After a specified period of time elapses with no operations being performed, the
camera enters the sleep mode (stand-by) to save battery power. SLEEP lets you
select sleep timer. OFF cancels the sleep mode.
The camera activates again as soon as you touch any button (the shutter button, arrow
pad, etc.)
1
In the menu, select T SLEEP T
OFF, 1min, 3min, 5min or 10min. Press
the
OK button.
~ “How to use the menus” (P. 38)
FORMAT (CARD SETUP)
1
In the menu, select T CARD SETUP.
Press .
● The CARD SETUP screen is displayed.
~ “How to use the menus” (P. 38)
2
Press to select FORMAT. Press
the
OK button.
● The FORMAT screen is displayed.
3
Press to select YES. Press OK.
● FORMAT is performed.
OK button
Note
● All existing data, including protected pictures, are erased when the card is formatted. Make
sure that you save or transfer important data to a PC before formatting a card.
This function lets you format a card. Formatting prepares cards to receive data. Before
using cards to be used for the first time with this camera or cards which have been
formatted on a PC, you must format them with this camera.
To Next Page
Loading...
