Focus
50
4
AF frame selection
Normally, the camera measures the distance to the subject using the 3 AF frames in
the viewfinder and selects the most appropriate point. This function allows you to
select only one AF frame.
No indication : Focuses using the 3 AF
frames. (Factory default
setting)
: Focuses using the left AF
frame.
: Focuses using the center AF
frame.
: Focuses using the right AF
frame.
1
While pressing the (AF frame
selection) button, rotate the main dial or
sub dial until the AF frame (blinking)
you want to select is displayed.
2
Take a picture.
Right AF frameLeft AF frame
Center AF frame
Viewfinder
Sub dial
Main dial
Control panel
button
Viewfinder indications when selecting the AF
frame
3 AF frames
Left AF frame
Center AF
frame
Right AF
frame
Control panel indications
can be switched as well as
viewfinder indications.
To Next Page
Loading...
