Olympus E-1 - Date;Time Setting; Date and Time

Function/setting customizing
132
9
Date/time setting
Date and time information is recorded on images. The file No. is also included with the
date and time information.
1
In the menu, select T . Press .
● The screen is displayed.
~ “How to use the menus” (P. 38)
2
Press to select one of the
following date formats:
Y-M-D (Year/Month/Day),
M-D-Y (Month/Day/Year),
D-M-Y (Day/Month/Year).
Then press .
● The following steps show the procedure used
when the date and time settings are set to Y-
M-D.
3
Press to set the year, then press
to move to the month setting.
● To return to the previous setting, press .
● The first two digits of the year are fixed.
4
Repeat this procedure until the date and
time are completely set.
5
Press the OK button.
● For a more accurate setting, press OK when
the time signal hits 00 seconds.
The clock starts when you press the button.
2003 . 01 . 01
00 : 00
Y M D
CANCELCANCEL SELECT GOGO
2003 . 01 . 01
00 : 00
CANCELCANCEL SELECT GOGO
OK button
Note
● The date/time setting is saved for approximately 5 months using the built-in battery.
Depending on how the camera is used, the date/time setting may be erased earlier.
Date/time settings will also be lost if the camera is left for a long period with no battery
loaded. The internal battery will be fully recharged in about one day with the the camera’
battery loaded.